SENSE-4 (HAZ Gateway) Configuration, Installation & Use
Viewing data from a SENSE-4 kit in the SignalFire Cloud
Data from a SENSE-4 kit is sent to the SignalFire Cloud for viewing. Before accessing the sensor data, you will need to have a SignalFire Cloud account access. Please contact Tan Delta for more information on setting up access by submitting a ...
Configuring the gateway in a SENSE-4 kit
The gateway used in the SENSE-4 kit is a "Ranger" unit supplied by SignalFire. The Ranger unit is designed to be used with a 4G SIM. This is mounted inside of the top cover in a SIM tray on the PCB. The Ranger unit should automatically recognise the ...
Configurating a HAZ sensor for use in a SENSE-4 kit
Prior to use with a SENSE-4 kit, the HAZ sensor supplied must be configured for both the communication type and also the oil it is to be used in. The sensor is configured using the Tan Delta CADS application and a HAZ configuration cable (Cable X), ...
Connecting a bracket to a SENSE-4 gateway
The following working instruction details how to fit a mounting bracket to a SENSE-4 gateway. First, take the ½” M-F Adaptor with nut and rubber sealing washer. Remove the Nut and discard (nut shown below:) Insert the Male thread of the adaptor ...
Assembling a SENSE-4 HAZ gateway kit
The following instructions are provided to guide you through assembling a SENSE-4 kit for installation and use. The gateway unit supplied with a SENSE-4 kit is a "Ranger" unit provided by SignalFire. The SignalFire Ranger uses their own "SignalFire ...