What is the standard warranty for the sensor?

• Related Articles

• What type of connector does the sensor use?

  The standard sensor uses a Bulgin 4000 series connector. Sensor connector pin allocations

• Do you have a sensor with a longer nose available?

  Yes, we have a sensor with a longer nose for applications where the standard sensor nose is not long enough. The example shown below is a longer nose sensor with a standard 1/2"BSPP thread. Example standard 1/2"BSPP sensor (left) and 1/2"BSPP long ...

• Can the sensor be used in hazardous environments?

  We have a "HAZ" version of the sensor specifically designed, built and certified to ATEX zone 2 / intrinsically safe / Class 1 Div 2. EX compliance standards: BS EN IEC 60079-0:2018 BS EN 60079-11:2012 This sensor works in exactly the same way as the ...

• How often should I take a reading from the sensor?

  Our Sense-2 and Sense-3 kits are pre-set to take a reading from the sensor at a standard time interval. Both kits enable you to set alert and alarm levels for oil condition and offer a customisable solution for oil condition monitoring. For most ...

• What is the sensor measuring?

  The sensor is monitoring the overall condition of the oil using our Full Spectrum Holistic (FSH) technology. In practice this means the sensor is monitoring the whole condition of the oil using a method called complex permittivity, which is a ratio ...