How much oil do you need to create a new oil profile?`

• Related Articles

• Does the sensor need annual calibration?

  No, there is no need to calibrate the sensor annually. If the oil the sensor is to be used in is changed to a different oil, then the sensor needs to be reconfigured for this oil using the CADS application. If the oil type remains the same, but the ...

• Does the sensor need to be in the oil flow?

  The sensor does not need to be in the direct flow of oil, provided there is turnover of oil (oil is moving). The sensor nose must remain immersed in oil at all times however to provide an accurate reading. The sensor nose must be fully immersed in ...

• What do I do if the oil I want to use is not in the oil database?

  You can select a similar oil in the database to use (be aware this may not give you the most accurate result), or alternatively, you can send us a sample of oil to profile and add to the database. You can request a new oil profile to be added HERE We ...

• What software do I need to configure the sensor?

  You need the Tan Delta CADS application to configure a sensor. This is designed for windows PCs and can be downloaded HERE All sensors must be configured prior to use for both the communication type to be used and also for the oil the sensor is to be ...

• Do I need to configure the sensor?

  Yes, the sensor is configured using a PC, configuration cable (Cable J) and the Tan Delta CADS application prior to installation. Help and support for the installation and use of the CADS application can be found HERE Prior to installation the sensor ...