How long does it take to analyse a sample with the MOT kit?
Once you have filled in the details of the asset and obtained the oil sample, the sensor analysis takes around 30 seconds.
Related Articles
How often should I take a reading from the sensor?
Our Sense-2 and Sense-3 kits are pre-set to take a reading from the sensor at a standard time interval. Both kits enable you to set alert and alarm levels for oil condition and offer a customisable solution for oil condition monitoring. For most ...
How long will the sensor last?
We estimate a service life for the sensor in excess of 10 years.
What is the minimum flow rate for the sensor?
There is no minimum flow rate, so long as there is turnover of the oil (oil is moving). Sensor should be installed into oil that does move A sensor installed in static oil will only read the same sample of oil
What types of oil does the sensor work with?
The sensor is capable of working in synthetic, semi synthetic and mineral oils. The database of oils currently profiled for the sensor can be checked on our website HERE The current oil database can also be downloaded from our website for using with ...
How do I check what oils are in the sensor database?
You can use our oil database check tool to see which oils are already profiled and in our oil database. The tool can be found on our main website HERE The oil database can also be downloaded from our website for use with the CADS application or MOT ...