This short video tutorial details how to change the oil profile the sensor is set to, using the Configuration and Data Management Software (CADS) application on a windows PC.
You will need a download of the current CADS installer and a PC with permission to install. You will also need an available USB port to use with the configuration cable.
This short video tutorial details how to change the application settings in the Configuration and Data Management Software (CADS) application on a windows PC.
This brief tutorial takes you through the process of configuring a sensor prior to installation. This process is common for the Sense 1, Sense 2 and Sense 3 kits and must be carried out prior to installing and using the sensor for the first time.
Prior to use with a SENSE-4 kit, the HAZ sensor supplied must be configured for both the communication type and also the oil it is to be used in. The sensor is configured using the Tan Delta CADS application and a HAZ configuration cable (Cable X), ...
This brief guide is intended to help you to select a suitable location and install a sensor into your asset. General Principles The sensor should be installed into a location where the sensor nose is exposed to live moving oil. Dynamic oil flow is ...